Why Are My Broadheads Shooting High? The Possible Reason

Author:

Published:

Updated:

Is your broadhead shooting high? Or why do my broadheads shoot different?

You are not alone. Most of the archers face this issue. But Why does it happen?

You know that broadhead and field points have different designs, which can affect their flight patterns. The large surface area of broadheads can cause more friction, slowing their flight speed and faster field points. Many factors also affect the broadhead shooting. So, a query may arise -Why are my broadheads shooting high?

Why Are My Broadheads Shooting High

Broadheads Shooting High

Broadheads might shoot high due to their blade design, low nocking point, and bow tune issues, which can affect arrow flight. A proper small change can lead to improved accuracy and performance. So, make one change at a time and test your results.

This’t everything. Without wasting time, Let’s look into the article directly.

Why Are My Broadheads Shooting High?

Are you conscious of why my broadheads shoot higher? When your broadheads consistently hit higher than expected while hunting, it can be aggravating. Let’s take a look at some of the most common reasons.

Why Are My Broadheads Shooting High

Weight And Fixed Blades Of The Broadhead

Broadheads, like field points, are designed to fly. Typically, they are heavier and have sharper blades.

They may hit higher than field points when shot from the same bow due to the weight difference.

The difference is usually only a few inches, but it can cause you to miss your target at longer ranges.

Position Of Tuning And Rest

Broadheads hitting high can be caused by tuning broadheads issue and arrow rest.

So, check that your arrow rest and position of broadhead tuning are correct.

Wind

The direction of the wind can affect arrow flight.

Overspined Arrow

Using an arrow shaft with an excessively high spine can result in this problem.

Arrow Spine and Inconsistency

Because of a lack of stiffening in your Arrow, broadheads may shoot inconsistently. Inadequate release technique and cam timing problems can create this issue. As a result, it may contact with the Arrow at rest.

when shooting, an overly stiff arrow can cause extra flex, affecting broadhead consistency.

Straightness And Bow Delivery

Inconsistency between broad heads and field points can occur when shooting high. Broadhead hits high if the arrow nock  height is not delivered straight by the bow.

Influence By Shooters

Some shooters may unintentionally change their form when they know an arrow has a broadhead. As a result, it can have an impact on the Arrow’s flight.

You can think about why do my broadheads shoot higher than field points. Broadhead might shoot higher than filed points due to several reasons:

Design differences: Both the broadhead and filed point have different designs. As a result, it can affect their flight patterns.

In general,

Broadheads have wide blades that create more surface area . Therefore, it causes more friction. The larger surface makes the arrow more susceptible to planning and drifting in wind conditions.

Rest Position: If your rest position is too low, it leads to the plane of the broadhead lower than the field points. 

So, adjusting the rest position can help align the flight of your broadhead with your field points.

However, many factors can influence ata broadheads to shoot high. Above are the main reasons, which generally occur and hit higher than expected.

Risk Of Shooting Broadheads High

Shooting broadheads high can pose certain risks and challenges. Here are some potential risks given below:

Risk Of Shooting Broadheads High

Inaccuracy

The most immediate risk is inaccuracy. If your broadhead is hitting consistently higher than your aim point, it leads to erratic flight.

These could lead to missed targets or, in a hunting scenario, wounding rather than cleanly taking the game.

So, what grain broadhead for 400 spine arrow? What grain offers accuracy?

Your draw weight, draw length, arrow length, point weight, and broadhead type will all affect the grain broadhead. 

Most hunters use 100-grain broadheads. For better penetration and higher draw weight, a heavier broadhead is appropriate. 

Equipment Damage

Broadheads are heavier and can cause more wear and tear on your bow and arrows. If they are not flying correctly, they can contact with the other equipment. 

As a result, this could lead to more significant damage over time.

Safety Hazards

A high-flying broadhead could go over a target. As a result, it can hit something or someone unintentionally. Sometimes, the bystanders can be injured by this. So, this is particularly risky in populated areas or shooting ranges.

Loss Of Arrow

You know that broadhead are typically more expensive than field points. Because of hitting high and missing targets, it could lead to a loss of arrows, which can be costly for you.

Decreased Your Confidence

Consistently missing your target can lead to a decreased confidence level in the shooting. As a result, it can affect your performance.

Potential For Injury

For shooting high, your broadhead may hit a hard surface like a rock or a tree. As a result, it can backfire and potentially cause injury.

Do you know how many times can you use a broadhead?

You can reuse the blades as long as they are razor-sharp. You can use the same broadhead to take down three or four deer while carrying your favorite spare blade.

However, if you’re having an issue with your broadhead shooting high, it is essential to diagnose the problem and address it. This could be for tuning issues, adjusting problems, or potentially using different broadheads.

How To Maintain The Right Height Of Shooting Broadheads?

Maintaining the proper height is critical for accurate and consistent performance. Here are some guidelines:

Broadhead Adjustment

Because of differences in design and weight, broadheads and field points frequently impact each other differently.

Fixed blade broadheads have bladed “wings” that catch air unevenly, causing them to deviate from their intended path. Mechanical heads reduce but do not eliminate this blade surface area. So,Broadhead alignment is essential for improved accuracy.

How To Maintain The Right Height Of Shooting Broadheads

So, What is the solution?

Don’t Worry!

Begin by fine tuning your bow for broadheads. Not every setup will fire broadheads in the same direction as field points.

Make use of a paper tune jig to ensure your arrow is centered or slightly off-center (depending on your release method).

To fine tune arrow flight, shoot through the paper at a distance of 10 feet.

Rest Adjustments

Adjust your rest if your broadheads consistently hit higher or lower than field points.

Move the rest to the left or right in small increments until both types of points intersect.

Vertical adjustments are inverse: move the rest down if they have an impact above and up if they have an impact below.

Bow Form and Timing

Check that the wheels on your bow are timed (synchronized).

Consistent practice is required to improve muscle memory and shooting form.

A skilled archer is a more effective bowhunter.

Choose The Right Broadhead

The broadhead with the most minor cutting diameter in flight will be the least affected by wind planning.

In general, fixed blade replaceable heads in the 11/8 to 1/4 inch range are a good choice for bowhunting situations.

A query may arise in your mind- 2 Blade Vs 3 Blade Broadhead.

Broadheads with two blades are known to penetrate more deeply. Better blood trails are produced by three blades. On which is easier to sharpen, opinions differ. 

Tune Your Broadhead

A properly tuned bow is the essential step in achieving the best broadhead flight. This may involve adjusting the draw weight, the draw length, and the timing of the cams.

Remember, small adjustments can make a big difference. So, make one change at a time and test your results. If you are a beginner, get advice from skilled archers or from a archery shop.

How Do I Know If My Bow Is Properly Tuned?

There are several methods to determine if your bow is tuned correctly:

Arrow flight: A well tuned bow will have minimal or no fishtail when the arrows leave the bowstring.

Consistent Shooting: If your bow is well tuned, your shoot will be consistent and hit where you want.

Straight String: Sight down the string from the top and the bottom of the bow. If the string is straight, it means that your bow is tuned correctly.

Bow and Arrow Levels: Use a bow level to make sure that the bow is straight and an arrow level to ensure the arrows fly straight.

Tuning Test: You can test your bow tuning by applying some methods like performing paper tuning, walk back tuning, etc. By using these methods, you can check the bow’s performance.

Remember, a well tuned bow will improve your performance and accuracy. It provides you with better confidence in your broadhead setup.

How To Shoot Perfectly In The Target?

To shoot perfectly at a target involves a combination of proper form, practice, and mental preparation. Here are some field tips to help you improve your accuracy:

How To Shoot Perfectly In The Target

Relax Your Bow Grip

Your non dominant hand should have as little contact with your bow as possible. It should be as if your bow is just barely, normally resting on the top of your bow hand.

Practice At The Right Distance

Start practicing at a comfortable distance to improve your confidence level. As a result, it will increase your accuracy in shooting.

Breath Normally

Ensure that you are not holding your breath and are at least breathing normally while focusing on the target.

Mental Preparation

Concentrate on your target and maintain focus. Always try to avoid distractions and keep your attention on the topic at hand.

Choose The Right Equipment

Use the proper equipment that suits your purpose and skill level. Make sure you maintain your equipment correctly.

Aim More Accurately

Focus on the target instead of the pin. Pick a small spot on the target and execute the shot smoothly.

By using these kinds of techniques, you may improve your shooting accuracy and performance.

Frequently Asked Questions (FAQ’s)

Should Broadheads Fly Like Field Points?

Broadheads should ideally fly like field points when properly tuned. Ensuring consistency and accuracy of the arrow flight requires careful arrow and bow setup.

Is It OK to Practice With Broadheads?

It is okay to practice with broadheads, and it is genuinely advised. When you practice with broadheads, you should be able to understand their characteristics. Also, you can be appropriately tuned for accurate shooting with your hunting setup.

What Is The Best Angle For Broadheads?

The best angle for broadheads is a sharp angle. Generally, around 20 to 30 degrees angle is best for broadheads. This allows for effective cutting and penetration.

Are Heavier Broadheads Better?

The grains of broadhead depend on your intended purposes and personal preferences. If you want to go for large game hunting, then a heavier broadhead is better for you.

Final Thoughts

In the end, a right broadhead plays a crucial role in archery performance. So, it is essential to shoot broadhead accurately. But why are my broadheads shooting high?

Blade design, low nocking point, and bow tune issues are the possible reasons for the broadhead shooting high. In general, the field points have different designs, which affect the flight pattern. The large surface area of broadheads can cause more friction, slowing their flight speed and faster field points.

I strongly believe that you have got your answer. Shooting broadhead high occurs some risk. Be aware of your safety concerns.

Bob Magic

Written by

Bob Magic

Meet Bob Magic, the archery maestro. A National Champion, “Coach of the Year,” and gold medalist. Bob simplifies archery, ensuring your bullseye success. Whether you’re a newbie or a pro, let Bob’s magic guide your arrow.

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest posts

  • When Is Bow And Arrow Hunting Season? [Each American State]

    When Is Bow And Arrow Hunting Season? [Each American State]

    A few days ago, some of my friends and I planned to hunt with a bow and arrow. All of them were beginners in archery, and only I was experienced in hunting. When I asked them about hunting season with bow and arrow, none of them had any idea about it. So, they asked me,…

  • Where To Hit A Deer With An Arrow? [Effective Shot Placement]

    Where To Hit A Deer With An Arrow? [Effective Shot Placement]

    When I was 13, my friend Jack and I took a course about hunting with a bow and an arrow. Our archery master was a man who always inspired us to show respect to the animals of the ecosystem. One day, Jack and I were planning to hunt deer, so we asked our archery master…

  • How Many Arrows Should I Take Hunting? [Right Ratio]

    How Many Arrows Should I Take Hunting? [Right Ratio]

    Suddenly, my friend Henry called him at his home a few days ago. I didn’t know the reason to call me. When I reached his house, he took me to his room and told me he wanted to hunt with bows and arrows. He didn’t know how many arrows would suit him to hunt successfully.…