Should Arrow Be Level On Rest?

Author:

Published:

Updated:

Hey enthusiasts! Are you worried about whether the arrow should be level on rest or not? Don’t worry! I am here to explain and clarify the answer in this article.

Arrow rests keep the arrow in place until it is released from the bowstring, ensuring accurate and safe shooting. A slight deviation of 1 degree can lead to missing the target up to 10 inches at a distance of 30 yards. It greatly affects your accuracy and overall performance. Then you must be thinking: should arrow be level on rest?

Should Arrow Be Level On Rest.

Arrow Be Level On Rest

The arrow doesn’t need to be level with the arrow rest. Instead, the nocking point should be positioned so that the arrow rests on the arrow rest and the bottom of the arrow is square to the string. This setup ensures accuracy in shots.

This isn’t everything. To clarify the answer, read this article. So, let’s get started!

Should Arrow Be Level On Rest?

Making sure the arrow is level from the nock height to the rest is crucial when assembling an arrow rest. The arrow doesn’t need to be level with the rest and D-loop, though. 

Should Arrow Be Level On Rest

Instead, 

The nocking point (D-loop) needs to be positioned so that the arrow rests on the arrow rest and the bottom of the arrow is square to the string. 

This will guarantee accurate and secure shooting by enabling the arrow penetration to come up off the blade during the shot.

However, I have recently set up my bow and haven’t done this; despite this, the bow is sighted in at 20 to 30 yards, and it is shooting fantastic.

But, you can think about leveling your arrow rest. So, how to level arrow rest?

You can precisely level your bow by using a bow level to level your arrow rest. Here is the process how should an arrow sit on a rest as follows:

  • Put your bow in a vice or on a flat surface to dry.
  • To precisely level your bow, use a bow level.
  • Attach an arrow level to an arrow nocked.
  • With a silver felt pen or white correction fluid, level the arrow and mark the proper nocking-point position.
  • This provides the most precise nocking point.
  • Always follow the manufacturer’s instructions when it comes to maintaining and checking your arrow rest.

So, how far should your arrow be past your rest?

When the bow is at full draw board, make sure your arrows extend at least 1 inch beyond the arrow rest.

Different Arrow Types And Levels On Rest

The following table summarizes the various types of arrows and their recommended level on the rest:

Arrow TypeLevel on Rest
Aluminum1/8″ above the rest
Fiberglass1/2″ above the rest
Carbon3/4″ above the rest
Wood1/4″ above the rest

These are just guidelines; the optimal level will vary depending on the archer’s preference, skill level, and the type of bow and arrow used. 

You can easily get a chart about the different arrow types and levels on the rest from an archery shop.

What Makes A Good Arrow Rest?

Here are some characteristics of a good arrow rest:

What Makes A Good Arrow Rest

Interference Is Kept To A Minimum

The more the rest interferes with the launch, the worse the arrow flight. This interference can cause tuning issues, flight issues, inconsistency, and, ultimately, frustration and poor group performance.

Durability

A perfect arrow rest would also be long-lasting, rock solid, and simple to adjust and fine-tune.

Arrow Retention

Another important factor to consider when selecting an arrow rest is the degree of arrow retention. The arrow should be securely held in place but not so tightly that it interferes with its flight.

There are several types of arrow rests available, each with its own set of benefits and drawbacks. Shelf rests, stick-on rests, and screw-in rests are some of the most common types. 

The best arrow rest for you will be determined by the type of bow you use, the price, and whether you want to pursue target practice or bowhunting.

Well, then, how does a magnetic arrow rest work? 

The magnet of the magnetic arrow rest helps to hold the arrow in place without making any interference with arrow flights. 

This arrow rest pulls the arrow arm back to the rest position

Should Arrow Be Level On Rest Or D Loop?

Usually, the arrow’s levelness is more critical at the arrow rest than it is at the D-loop. This is the reason why:

Arrow Rest:

An essential element of arrow flight is the arrow rest. The arrow should rest level on the arrow rest after it is nocked on the bowstring. 

This guarantees a straight launch and minimal interference for the arrow during flight.

D-Loop:

The release aid is attached to the D-loop, a tiny loop of material that is fastened to the bowstring. This will help you to rest.

The levelness of the D-loop is less important than the levelness of the arrow on the rest, even though it should be installed and adjusted appropriately for the shooter’s comfort and consistency.

To sum up, for the perfect arrow flight and accuracy, the arrow rest must be level. A 100-grain broadhead weight is considered suitable for its improved accuracy and arrow flight.

How Should Arrow Sit On Drop Away Rest?

When installing a drop-away arrow rest, make sure the arrow rest is down when the bow is not drawn. 

How Should Arrow Sit On Drop Away Rest

However, once the bow has been drawn, the arrow rest should appear to guide the arrow. This is critical to keep in mind. 

If you configure it correctly, the benefit of the drop-away rest will be recovered, and your accuracy will improve as a result.

To assemble a drop-away arrow rest, do the following step process:

Step 1: Extra Clearance

To provide extra vane clearance, attach the arrow rest to the bow riser and modify the launcher height so that the arrow shaft tuning is positioned in the center of the threaded Berger buttonhole or slightly above it.

Step 2: Nock Point

Aim for a nock point height of 90 degrees, or 1/8 inch above center, on the arrow.

Now,

The question is:

Where should my arrow rest be?

The position of the arrow rest is determined by the type of bow used. A shelf rest is the most basic type of arrow square rest used by both longbow and recurve archers for recurve bows. 

The arrow rest is typically attached to the riser of a compound bow. Make sure the rest is like a bow square to an arrow shelf when installing it. You can see the bowhunting video for better understanding.

Common Challenges And Solutions

Here are some challenges and solutions about leveling the arrow on the rest:

Arrow Rest Isn’t Leveld Properly

The arrow may deviate from its course if your arrow isn’t leveled properly.

For example,

At a distance of thirty yards, it is estimated that a deviation of just one degree can cause the center shot to be missed by up to ten inches.

So, how will you fix it? 

You can easily fix it by making sure the arrow rest is level with a bubble level.

Too High or Too Low an Arrow Rest

Sometimes, it is commonly seen that the arrow rest is too long or too low.As a result, it occurs erratic flight of the arrow.

Now,

The question is:

How do you adjust this?

You can adjust the height of your arrow rest until it’s at the correct height.

For example,

If your arrows are consistently hitting above your target, 

Then your arrow rest might be too high. Lowering the rest can help bring your shots on target practice.

Arrow Rest Too Close or Far From Bow

The arrow rest’s placement of your bow can influence the trajectory of your arrow.

So, what should you do?

Carefully adjust it until the distance between the bow and arrow rest is in proper length.

For example,

Your rest may be too near or too far from the bow if your arrows are fishtailing, or flying side to side. 

The arrow’s flight can be stabilized by adjusting the rest’s position. The sharpness of a broadhead also impacts accuracy. To ensure, you can test broadhead sharpness by cutting a piece of paper.

Arrow Rest Not Attached Closely

The arrow may fly off course if the arrow rest isn’t attached to the bow securely.

So, what is the solution?

Solution: Make sure that the rest of your bow’s arrow is attached firmly.

For instance, 

Uneven arrow flight may result from a loose arrow rest. Retightening the remaining areas can enhance consistency.

Incompatible Arrow Rest

If your arrow rest isn’t compatible with your bow, the arrow may fly off course.

As for a solution, Choose an arrow rest that is compatible with your bow.

How To Adjust The Arrow Level On My Rest?

To modify the arrow level on your rest, take the following actions:

How To Adjust The Arrow Level On My Rest

Step 1: Cock An Arrow 

Cock an arrow onto the bowstring and set the shaft in the up position (as though the rest is fully drawn) on the arrow rest arm.

Step 2: Adjust The Vertical Block

To make sure the arrow is level from the nock to the rest, slightly adjust the vertical block on the rest using an arrow level. A slight change can make a huge difference in the shot.

Step 3: Secure The Rest

Tighten the screws to secure the rest in place after you’ve reached the desired level.

Depending on the archer’s preference, skill level, and type of bow and arrow used, there may be variations in the ideal level. You draw weight can also affect it. So,keep in mind to consider.

Frequently Asked Questions(FAQs)

Are Longer Arrows More Accurate?

The length of an arrow can have an impact on its accuracy. In general, a shorter arrow has a stiffer shafts spine, allowing for a more accurate shot than longer arrows. They also have a faster flight speed.

How Long Do I Cut My Arrows?

Measure from the end of your non-dominant hand to the corner of your mouth on your dominant side to cut your arrows. The arrow length is then calculated by adding 2 inches. 

Why Do My Arrows Pull To The Left?

Arrows pulling to the left can occur for a variety of reasons. It could be the result of an inconsistent release, in which the fingers or release aid exert a slight leftward pressure on the bowstring. 

Final Words

Should arrow be level on rest? It depends on your personal preference. In general,it is not suggested to level the arrow on the rest.

Instead, the nocking point(D-loop)should be positioned so that the arrow rests on the arrow rest and the bottom of the arrow is square to the string.

I have recently set up my bow and haven’t done this; despite this, the bow is sighted in at 20 to 30 yards, and it is shooting fantastic. But for improved accuracy, you can do it to satisfy your mind and to increase your confidence level.

Bob Magic

Written by

Bob Magic

Meet Bob Magic, the archery maestro. A National Champion, “Coach of the Year,” and gold medalist. Bob simplifies archery, ensuring your bullseye success. Whether you’re a newbie or a pro, let Bob’s magic guide your arrow.

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest posts

  • When Is Bow And Arrow Hunting Season? [Each American State]

    When Is Bow And Arrow Hunting Season? [Each American State]

    A few days ago, some of my friends and I planned to hunt with a bow and arrow. All of them were beginners in archery, and only I was experienced in hunting. When I asked them about hunting season with bow and arrow, none of them had any idea about it. So, they asked me,…

  • Where To Hit A Deer With An Arrow? [Effective Shot Placement]

    Where To Hit A Deer With An Arrow? [Effective Shot Placement]

    When I was 13, my friend Jack and I took a course about hunting with a bow and an arrow. Our archery master was a man who always inspired us to show respect to the animals of the ecosystem. One day, Jack and I were planning to hunt deer, so we asked our archery master…

  • How Many Arrows Should I Take Hunting? [Right Ratio]

    How Many Arrows Should I Take Hunting? [Right Ratio]

    Suddenly, my friend Henry called him at his home a few days ago. I didn’t know the reason to call me. When I reached his house, he took me to his room and told me he wanted to hunt with bows and arrows. He didn’t know how many arrows would suit him to hunt successfully.…