How To Adjust A Qad Drop Away Rest? (Step By Step Guide)

Author:

Published:

Updated:

Hey! Are you conscious about adjusting your DAQ drop-away rest? Don’t be panicked. In this article, I will clear you quickly.

Improved accuracy and arrow flight are essential for archery performance. The primary purpose of adjusting a QAD drop away rest is to get improved accuracy, proper arrow flight, clearance, and proper bow tuning. It is a little bit different to adjust than other arrow rests. So, how to adjust a qad drop away rest?

How To Adjust A Qad Drop Away Rest

Adjust Qad Drop Away Rest

To adjust a QAD away rest, first, you have to measure 3 or 4 inches less than the bow rest. Then, put the clamp in place. After that, lock it down and verify the rest position. In the end, examined the cords and verified the lines. By following these steps, you can adjust your QAD drop-away rest.

This isn’t everything. No matter what type of archer you are. Read more to know the step-by-step process to adjust appropriately. So, Let’s get started!

What Are The Purposes Of Adjusting The Vertical Position Of The QAD Rest?

The vertical position of the qad rest adjusting is very crucial for several reasons:

What Are The Purposes Of Adjusting The Vertical Position Of The QAD Rest

Arrow Flight 

The vertical position of the rest can affect your arrow flight. If your arrow rest is too low or too high, it can lead to erratic flight of the arrow. You shouldn’t have arrow be level on rest for proper arrow flight.

Clearance

Adjusting the vertical position of the QAD rest helps to prevent the rest from hitting the riser of the bow. 

So, what will happen if the arrow rest hits the riser?

If the arrow rest hits the riser, it may affect the arrow flight and potentially damage your bow.

Tuning

The vertical position is very crucial for proper bow tuning. If the rest is not correctly placed, it can lead to issues like the rest not dropping on time or dropping very slowly.

Accuracy

A properly adjusted rest can improve the accuracy of the shot and overall performance.

Remember, a small adjustment can make a big change, so it is crucial to check the bow’s tuning to ensure optimal performance.

Are you a QAD ultra rest lover? So, how to adjust QAD ultra rest hunter rest?

You can take the following actions to modify the QAD UltraRest Hunter model:

  1. To make the mounting block move up, slightly loosen the mounting screw.
  2. It won’t do much good to unscrew the windage adjustment screw and spin the rest in the direction of the bow’s aft.
  3. Tie your loop around the location where the arrow should be level and even with the riser’s rest hole if you need to fine-tune it by moving it up and down.
  4. To make sure the arrow is level from the nock to the rest, slightly adjust the vertical block on the rest. Later on in the tuning procedure, smaller adjustments can be made.

Now, you can think about how to tune a QAD away rest. Follow these steps to tune a QAD drop-away rest:

  • Change the timing: Measure 3-4 inches below the rest and attach a D-loop with the provided clamp or a half hitch. Draw the bow back slowly in a press or by hand. Allow the cord to slide into place. Serve or lock the rest cord into the string.
  • Fine-tune the timing: An anchor knot can be used to adjust the timing of the drop-away rest. 

This procedure entails either slowing down the arrow flight to confirm or simply using chalk on the arrow vanes to show where the arrow may come into contact with the rest.

A query may arise in your mind: how many times can you use a broadhead?

In general, as long as the blades are razor sharp, you can use and reuse them. You can carry your preferred spare blade and shoot 3 or 4 deer with the same broadhead.

How To Adjust A Qad Drop Away Rest?

Wondering how do I adjust my drop-away rest time? Okay, so here’s a detailed tutorial on how to adjust arrow rest  made by QAD (Quality Archery Designs):

How To Adjust A Qad Drop Away Rest.
  • Step 1: Quantity
  • Step 2: Put The Clamp In Place
  • Step 3: Make A Bow
  • Step 4: Lock It Down
  • Step 5: Verify The Rest Position
  • Step 6: Examine The Cords
  • Step 7: Verify The Lines
  • Step 8: Examine For Problems With Stretching

Step 1: Quantity

Measure three or four inches less than the others to start. You would measure to the 2 or 3-inch mark, for instance, if your rest is 6 inches from the top of the bow.

Step 2: Put The Clamp In Place

Use a half hitch or the included clamp to create a D-loop loosely. This is analogous to tying an adjustable loose knot.

Step 3: Make A Bow 

Redraw board the bow slowly by hand or in a press. The timing cord will slide into place as you proceed. It feels like yanking back a slingshot.

Step 4: Lock It Down

 After the cord is positioned, serve the remaining cord into the string or lock it down. It’s similar to pulling on the knot you tied earlier.

Step 5: Verify The Rest Position

 Make sure the bow is in the proper rest position before firing. You have to adjust the rest until it lies vertically if it is upright position. This is analogous to tilting a seesaw.

Step 6: Examine The Cords

 Check to see if the cords are connected to the cable by opening the inserts section. If not, firmly attach it with pliers. This is analogous to making sure a plug is inserted into a socket correctly.

Step 7: Verify The Lines

Make sure the two white lines in the middle can always be seen. Check the screws if they don’t remain in that position for very long. If necessary, tighten them with a screwdriver. It is comparable to changing the focus on a set of binoculars.

Step 8: Examine For Problems With Stretching:

Check the cords if you are still having trouble stretching. Additionally, consider whether they are damaged or misused. 

Your stretching problems can be resolved by simply resetting the cords. It’s similar to changing a scuffed rubber band.

To ensure peak performance, remember to check the bow’s tuning after making any rest adjustments.

And that it! That’s how to set up a QAD drop-away rest. So, now follow the process attentively and enjoy the perfect play.

What Is The Difference Between A Drop Away Rest And Other Arrow Rests?

The differences between a drop-away rest and other arrow rests are:

What Is The Difference Between A Drop Away Rest And Other Arrow Rests

Drop Away Rest

An arrow rest that falls away from the bow as soon as the arrow is released is called a drop-away rest. 

This increases arrow speed and lowers the possibility of fletching contact by allowing the arrow to fly free. Drop-away rests come in two varieties: cable-driven and limb-driven. 

Their attachment to the bow is where the two differ from one another. While cable-activated rests are made possible by the bow’s cables, limb-driven rests are attached to the limbs of the bow.

That’s why you gotta be clear about how to adjust drop away arrow rest? So you gotta be clear about that.

Other Arrow Rests

Launcher rests, and containment rests are two more varieties of arrow rests. To minimize friction, launcher rests use a straightforward design with two prongs or a blade supporting the arrow with little to no contact. 

They are not advised for bowhunting since the arrow will fall off easily when shooting at strange angles. They are primarily used for target archery. 

Containment rests are excellent for beginners because they keep the arrow from falling off the rest and guarantee a successful shot. They hold the arrow inside a housing or cage. 

Because it makes more contact with the arrow and fletching than the launcher rest, this kind of body of rest is less accurate.

Now another questions may pop up in your mind. Which is better, drop away arrow rest and whisker biscuit?

Whisker biscuits arrow rest is better for novice archers. It is less expensive and reliable. It reduces the arrow speed for making complete contact with the arrow. It is better to use in the cold season and is easy to use.

Isn’t your QAD rest working well? So, how do QAD rest adjustments? You can adjust the QAD UltraRest by following these steps:

  • Loosen the mounting screw just enough to allow the mounting block to rise.
  • You can loosen the windage adjustment screw and rotate the rest towards the aft of the bow, but it won’t do much.
  • Tie your loop around the place where the arrow-rest arm should be level and even with the rest hole on the riser if you need to fine-tune your rest by adjusting it up and down.

Always remember to follow the qad Ultra Rest instructions for easy adjustment.

How Do You Position An Arrow In Drop Away Rest?

These procedures should be followed to place an arrow in a drop-away rest:

How Do You Position An Arrow In Drop Away Rest
  • Make sure the bow is oriented parallel to the ground.
  • The arrow should be inserted into the string nocking point with your thumb on top of it.
  • Make sure your fingers are far away from the release point of the bowstring.

I hope I have cleared out your doubts. how do I set up drop-away rest? So, don’t be confused right now. Just do it rightly and enjoy.

Frequently Asked Questions(FAQs)

Can I Adjust The Drop Speed Of A Qad Drop-Away Rest?

The drop speed of a QAD drop-away rest can be adjusted. Adjust the timing of its by measuring 3 or 4 inches below the rest, loosely attaching the provided clamp or a half hitch as a D-loop, and locking it down or serving the rest cord into the string.

Is It Possible To Troubleshoot Arrow Clearance Issues With A Qad Rest?

Yes, a QAD rest can be used to troubleshoot arrow clearance issues. Setting timing and setting distance are the two major issues that a fletching problem. Wait a few moments after completing the rest of the setup before shooting.

How Often Should I Check And Adjust My Qad Drop-Away Rest?

Every 100 shots or so, you should check and adjust your QAD drop-away rest. This will help ensure that the rest of the system is working properly and your arrows are flying straight.

Final Words

In the end, you know that improved accuracy and arrow flight are essential for archery performance. Without adjusting your arrow rest properly, you won’t be able to get improved accuracy and proper arrow flight. Changing the vertical position of the QAD rest helps to prevent the rest from hitting the riser of the bow. So, how to adjust a qad drop away rest?

To adjust a QAD away rest, first, you have to measure 3 or 4 inches less than the bow rest. Then, put the clamp in place. After that, lock it down and verify the rest position. In the end, examined the cords and verified the lines. 

If the arrow rest hits the riser, it may affect the arrow flight and potentially damage your bow. Be aware of your safety concerns.

Bob Magic

Written by

Bob Magic

Meet Bob Magic, the archery maestro. A National Champion, “Coach of the Year,” and gold medalist. Bob simplifies archery, ensuring your bullseye success. Whether you’re a newbie or a pro, let Bob’s magic guide your arrow.

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest posts

  • When Is Bow And Arrow Hunting Season? [Each American State]

    When Is Bow And Arrow Hunting Season? [Each American State]

    A few days ago, some of my friends and I planned to hunt with a bow and arrow. All of them were beginners in archery, and only I was experienced in hunting. When I asked them about hunting season with bow and arrow, none of them had any idea about it. So, they asked me,…

  • Where To Hit A Deer With An Arrow? [Effective Shot Placement]

    Where To Hit A Deer With An Arrow? [Effective Shot Placement]

    When I was 13, my friend Jack and I took a course about hunting with a bow and an arrow. Our archery master was a man who always inspired us to show respect to the animals of the ecosystem. One day, Jack and I were planning to hunt deer, so we asked our archery master…

  • How Many Arrows Should I Take Hunting? [Right Ratio]

    How Many Arrows Should I Take Hunting? [Right Ratio]

    Suddenly, my friend Henry called him at his home a few days ago. I didn’t know the reason to call me. When I reached his house, he took me to his room and told me he wanted to hunt with bows and arrows. He didn’t know how many arrows would suit him to hunt successfully.…