What Glue To Use For Arrow Inserts? (Without Losing Your Mind)




There are many factors to consider when using glue for arrow inserts. Different glues have different compatibility. Every glue has its specific characteristics. Specific arrow shafts have specific glue recommendations. So, a query comes: What glue to use for arrow inserts?

What Glue To Use For Arrow Inserts

Glue For Arrow Inserts

In short, hot melt glue, cold melt glue, super glue, epoxy resin, and gorilla glue are the common types of glue to use for arrow inserts. Every glue has specific characteristics. Such cyanoacrylate adhesive is recommended for carbon shafts for its strength and quick bonding.

I think this is not the whole scenario yet. There are many factors to consider when using glue for arrow inserts. Be aware of your safety concerns. To get more information, let’s dive into deep-

Key Takeaways

  • Glue compatibility is very important because different types of glue are suitable for different types of arrow shafts. 
  • Water resistance, strength, flexibility, curing time, and glue compatibility are the most important because they ensure you a secure bond.
  • Surface preparation is the most important. To ensure a secure bond, glue curing time, pressure, and conditions are very important.

is not the whole scenario yet. There are many factors to consider when using glue for arrow inserts. Be aware of your safety concerns. To get more information, let’s dive into deep-

So, What Glue To Use For Arrow Inserts?

Using a strong and durable glue is essential when attaching arrow inserts to the arrow.Different shooters may have their preferences. A common question comes to many archers: What kind of glue to use for arrow insert? Here are some popular choices for arrow insert attachments:

What Glue To Use For Arrow Inserts

Hot Melt Glue

Hot melt glue sticks can be used with a hot glue gun. This kind of glue forms solid bonds, sets quickly, and is simple to use.

Cold Melt Glue

Cold melt adhesives are applied by heating them. It is also available in stick form. To liquefy the glue, they need less heat than hot-melt adhesive, yet. 

Cold adhesives are excellent for attaching parts that don’t want to use high heat, such as anything going into carbon arrow shafts. These glues minimize the possibility of damaging carbon. Since they liquefy at a lower melting temperature .

Cyanoacrylate Adhesive

  • Cyanoacrylate adhesives are typically known as super glue. 
  • Fast-bonding and can be an excellent choice for arrow inserts. 
  • Available in a variety of viscosities(thicknesses). 
  • You can select the one that best suits your needs.

Epoxy Resin

Epoxy is a two-part adhesive that forms a combined connection with strong and durable.

A strong, specialist arrow shaft epoxy glue made for archery purposes is advised to provide a long-lasting and reliable adhesion between the insert and the arrow shaft.

Usually, it takes a bit longer to cure than Superglue. But it will provide you with a stronger  bond.

Gorilla Glue

Some archers prefer to use gorilla glue inserts in cold climates. It doesn’t tend to crack when it gets cold. So,can gorilla glue be used for arrow inserts? Gorilla glue is not advised since it might not offer a strong enough adhesive. It might make the arrow heavier than necessary.

Now, the question is, what glue to use for arrow points? A specialist adhesive such as arrow shaft epoxy or hot melt adhesives is used in archery to firmly affix arrow points to carbon or aluminium shafts.

Yet, it is important to follow the manufacturer’s direction for using both the arrow inserts and the glue. Blue glue is also used for arrow inserts in archery to prevent them from loose during use.

Different Types Of Arrow Shafts And Their Suitable Gule

Determining the right glue for arrow shafts depends on the arrow shaft’s material.  So, what glue do I use for arrow inserts? Here are some arrow shaft materials with suggested glue:

Different Types Of Arrow Shafts And Their Suitable Gule

Wooden Shafts

Traditional wooden arrows work well with wood glue. Epoxy is another adhesive that is used for a strong bond. Epoxy glue might not be as accommodating if you need to adjust later.

So, wood glue or epoxy glue is recommended for wooden shafts.

Aluminium Shafts

Super glue is frequently chosen for aluminium arrows. Super glue gel provides a fast and strong glue bond. Epoxy is also a good choice when attaching points.

So, cyanoacrylate or epoxy glues are recommended for aluminium shafts. 

Carbon Shafts

Specialized carbon arrows glue or CA glue are recommended for carbon shafts. Because of its strength and rapid bonding, CA glue is widely used. Certain glues are made by certain manufacturers specifically for carbon arrow shafts.

Composite Shafts (Carbon/Aluminum mix)

A great material choice for composite shafts is epoxy. It gives aluminium and carbon components a tight connection.

It is advised to use epoxy or specific composite arrow adhesive for composite shafts. It’s critical to adhere to the glue and arrow shaft manufacturer’s instructions.

These can vary with your personal preference and shooting style. It is good to experiment with different types of glue which is best for your shooting style. Do you know even your shooting style affects killing an animal through the arrow? An accurate shot into the essential organ can lead to the oxygen supply being turned off, which weakens them and may be lethal.

Factors Should You Consider When Selecting Glue For Arrow Inserts

Selecting the right glue is essential to provide a strong and stable bond. Here are some things to think about:


Verify that the glue is appropriate for the insert’s and the arrow shaft’s materials. Brass, steel, or aluminium are often used materials for inserts. Common materials for arrows are aluminium, carbon, or wood. 

Curing Time

Take into account the curing time of the glue. Certain glues set faster than others and cure more slowly. Choose a glue that will allow you to move the arrow insert into place before it solidifies.


Determine the glue’s strength. It must have a strong connection that can resist the force exerted on the arrow during shooting.

Application Simplicity 

Opt applicators that are easy to use. Choose the glue that is specially made for your arrow shafts.

Resistant To Temperature 

Choose a glue that can withstand high or low temperatures. For example, cold melt glue requires less heat to melt. As a result, it reduces the potential damage to your materials.


Remember to ensure that the glue allows for arrow flex without compromising the bond.

Resistance To Water

Select a glue that is waterproof for your different weather conditions. 

To ensure a strong bond for your arrows, always follow the manufacturer’s guidelines. Sometimes, it can vary with your preference. 

How To Glue Arrow Inserts? (Step-By-Step)

How To Glue Arrow Inserts

It only needs a little equipment or effort to glue arrow inserts. It would be best if you had to follow the steps carefully. 

Here is how to glue arrow inserts the most effectively. 

Ensure that the glue is ready to use as you follow each step’s instructions. 

  • Cut the Arrows
  • Gather Materials
  • Heat the Inserts
  • Heat and Apply Glue
  • Twist Off Excess Glue
  • Place and Press the Insert

Step 1:- Cut the Arrows

Firstly, cut some arrows before you glue in the inserts. They arrow need to be cut according to your model’s needed size. Recall that the finishing should be smooth and must have removed the excess from the ends.

Step 2:- Gather Materials

Once you have finished cutting your arrow to the desired length, you will gather some inserts for your particular model of an arrow, such as hot glue sticks, adjustable pliers, a lighter, and a wiper.

Step 3:- Heat the Inserts

Depending on your insert quality and melting rate, heat them for 30 to 60 seconds. The goal is to warm them sufficiently to melt without going excessive. Overheating will change the insert size of the arrow.

Step 4:- Heat and Apply Glue

The glue sticks heat for at least 20 seconds, being careful not to overheat them. Then, continue to apply the melted glue to the insert. Be aware of your safety concerns in this step. Preventing fingertip burns is a typical concern for archers.

Step 5:- Twist Off Excess Glue

After that, carefully twist off any excess glue. Be careful not to go overboard.

Step 6:- Place and Press the Insert

After applying the glue, promptly place the arrow insert. Firmly press the insert into position until it reaches the position you want.

You can also think about removing the insert from the carbon arrow. First, use a heat source to apply heat to remove the insert. Then, Use an arrow puller to grip the inserts securely. Finally, carefully twist and pull the insert out of the arrow shaft.

Yet, be careful about applying the glue to the insert. Be aware of safety concerns to avoid any damage.

How To Cure The Glue And Ensure A Strong Bond?

Surface Preparation 

Most of the time, using a 50:50 solution of isopropyl alcohol(IPA) and water will be enough to clean the surface. Water will remove accumulated dust and grime. So, denatured alcohol will dissolve light greases. Thus, ensure that the surfaces are dry before applying the adhesive tape.

How To Cure The Glue And Ensure A Strong Bond

Proper Application 

Apply the glue to both surfaces. You can spread the glue with a brush or using a nozzle or another safety method.

Use the rear right amount for your model. Too much or too little adhesive can affect the bond strength. 


Some adhesive requires applying pressure during the curing process. Use the right amount of pressure for the desired model.

An insufficient amount of pressure can lead to a weak bond. An excessive amount could squeeze out the glue.

Curing Time

Some glue needs more time than others for curing. Curing time is crucial for achieving the greatest bond strength. Follow the manufacturer’s recommended time. 

Environmental Condition

Be aware of the ideal humidity and temperature conditions for curing. Some adhesives may need specific environmental conditions for optimal performance. 

Follow Instructions 

Must follow the instructions provided by adhesive manufacturers. Various adhesives have specific requirements and distinct qualities.

Remember that the type of glue needs specific types of inserts.

Troubleshooting Tips For Common Gluing Problems

  • Ensure that you have prepared the surface. You need a clean and smooth surface for better adhesion. 
  • Verify the glue compatibility with your insert materials. Some glue works with specific materials.  
  • Curing time is the most important for achieving the most bond strength. Follow the curing time with your environmental condition-specific manufacturers. 
  • Use the right amount of adhesive for the bond. Too little or too much glue can weaken the bond.
  • Make sure you are following the mixture ratio and procedure for using a two-part adhesive.
  • Ensure that the glue matches your insert types. For example, Super Glue is recommended for aluminium shafts.
  • Be aware of certain contaminants. Such as some types of plastics can inhibit the curing process.
  • Think about your environmental condition. Some adhesives are temperature-sensitive. Follow the manufacturer’s rules.
  • Ensure you have followed the glueing insert steps.

Let’s talk about one off topic which is mostly asked by young archers, drop arrow rest vs whisker biscuit: which is better? Normally an arrow rest ensures the best forgiveness and provides support during shot. So, don’t worry about it.

Yet, always follow the manufacturer’s recommendation for both the glue and arrow insert. If you are a beginner, get help from an expert archer. 

Frequently Asked Questions (FAQ)

Can You Use Gorilla Glue For Arrow Inserts?

It is not recommended for arrow inserts. It can’t provide a strong bond and add extra weight to the arrow.

How Long Does Arrow Glue Last?

It depends on the specific and brand type of glue. Some manufacturers state that, with the right storage, arrow glues can last up to two years. 

Can I Use Hot Glue For Arrow Inserts?

It is optional in general. It may not produce a strong, long-lasting binding, which would compromise the performance and security of the arrow.

How Can I Remove Arrow Inserts?

By using such instruments including heat source, pliers or arrow puller and rubber gloves.

Final Words

Selecting the appropriate glue is crucial to ensure a secure and reliable bond. There are many considerations when choosing the glue. Hope you have cleared out about what glue to use for arrow inserts. Different glues have different compatibility with arrow shafts. Be aware of the other factors which I have mentioned above. Also, you may have your personal preference for using glue.

However, surface preparation is the most important with curing time, pressure, and environmental conditions to cure the glue and ensure a strong bond. Be aware of your safety concerns.

Bob Magic

Written by

Bob Magic

Meet Bob Magic, the archery maestro. A National Champion, “Coach of the Year,” and gold medalist. Bob simplifies archery, ensuring your bullseye success. Whether you’re a newbie or a pro, let Bob’s magic guide your arrow.

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest posts

  • When Is Bow And Arrow Hunting Season? [Each American State]

    When Is Bow And Arrow Hunting Season? [Each American State]

    A few days ago, some of my friends and I planned to hunt with a bow and arrow. All of them were beginners in archery, and only I was experienced in hunting. When I asked them about hunting season with bow and arrow, none of them had any idea about it. So, they asked me,…

  • Where To Hit A Deer With An Arrow? [Effective Shot Placement]

    Where To Hit A Deer With An Arrow? [Effective Shot Placement]

    When I was 13, my friend Jack and I took a course about hunting with a bow and an arrow. Our archery master was a man who always inspired us to show respect to the animals of the ecosystem. One day, Jack and I were planning to hunt deer, so we asked our archery master…

  • How Many Arrows Should I Take Hunting? [Right Ratio]

    How Many Arrows Should I Take Hunting? [Right Ratio]

    Suddenly, my friend Henry called him at his home a few days ago. I didn’t know the reason to call me. When I reached his house, he took me to his room and told me he wanted to hunt with bows and arrows. He didn’t know how many arrows would suit him to hunt successfully.…